Online Turbidity Analyzer em i wanpela indastriel-greid wol mounted onlain turbiditi monitoring na kontrol instramen. Em i ken gat wanpela 'online turbidity probe' bilong skelim 'turbidity' bilong wara long taim stret na oltaim.

Dispela 'analyzer' i sapotim 'real time turbidity' na 'temperature display' wantaim 'automatic temperature compensation' bilong kisim gutpela 'accuracy'. Em i save givim RS485 MODBUS-RTU komunikesen, 4-20mA analog autput na rilei kontrol bilong alam o dosing linkej.

Em i gat isipela kalibresen, pawa-off data storage, strongpela anti-intaferens na IP65 proteksen, we i gutpela long longpela taim stebol operesen insait long ol indastrial fil envairomen.

Ol i save yusim planti long ol ples bilong dring wara, saplai bilong wara long paip, akwakalsa, wok bilong sekim wara antap long graun, wara bilong indastri na ol sistem bilong klinim pipia wara.

As tingting bilong wok

I yusim 90 digri 'scattered light detection' prinsipel. Lait sos i save givim lait, na ol liklik hap wara i stap i save tromoi lait i go nabaut. Ditekta i save kisim lait i go nabaut na senisim i go long 'turbidity value', wantaim otomatik tempereja kompensesen long kisim stretpela data.

Ol samting bilong 'Online Turbidity Analyzerkey'

1.Infraret optikal diteksen, anti-lait intaferens, strongpela stebiliti.
2.Otomatik tempereja kompensesen, adapt long ol kompleks senis bilong tempereja bilong wara.
Standet RS485 komunikesen, isi koneksen wantaim PLC na SCADA.
4.Opsenel otomatik wok bilong klinim, i save daunim wok bilong lukautim ol pipia.
5.Indastriel anti-haus bilong korosen, i gutpela long ol pipia na wara.
6.Bikpela mak bilong skelim, inap long klinpela wara i go inap long ol pipia wara we i gat bikpela 'turbidity'.

Ol mak bilong prodak

Paramita	Spesifikasen
Ansa	Turbidity: 0.01 mg/L Tempereja: 0.1 digri
I stret	Turbiditi: 2% Tempereja: ±0.2 digri ±1 Dijit
Tempereja bilong wok	0~50 digri
Tempereja bilong Stoa	-10~70 digri
Displei	LCD 240×160 dot matrix / LCD 256×128 dot matrix
Nau autput 1	Isolated 4~20mA, yu ken stretim long pH/ORP/TEMP, maks lod 500Ω
Karent Autput 2	Isolated 4~20mA, yu ken stretim long pH/ORP/TEMP, maks lod 500Ω
RS485 Intafeis	MODBUS RTU protokol
Kontrol	Contact Output: RELAY ON/OFF, 240VAC 3A Max Ol seting: Tupela indipenden HI/LO kontrol poin
Ol seting bilong klinim	Wanpela kontrol kontek autput, ON 0-9999 seken / OFF 0-999.9 aua
Proteksen Reting	IP65
Pawa Saplai	100V~240VAC ±10%, 50/60Hz, 5W
Rot bilong putim	Wol-mounted / Pipeline-mounted / Panel-mounted
Ol sais bilong yunit	96 mm × 96 mm × 125 mm (H×W×D)
Ol sais bilong katim	93 mm × 93 mm (H×W)
Weit	0.8 kg

Teknikel Spesifikasen

Paramita	Diskripsen
Opereting Voltej	DC 9-28V
Bikpela pawa konsumsen	5W
Rot bilong painim	90 digri lait spreim rot
Lait Sos	660nm laser
Skelim mak	0–1/20/100/2000 NTU
Ansa	0.0001 NTU (<1 NTU), 0.001 NTU (≥1 NTU)
Daunbilo Diteksen Limit	0.005 NTU
I stret	0–100 NTU: 2% o ±0.02 NTU (wanem i bikpela moa); 0–2000 NTU: ±0.5 NTU (wanem i bikpela moa) (bihainim Formazin praimeri standet long 25 digri)
Tempereja bilong wok	-5 i go long 45 digri
Opereting Mode	Pressurized flow-through type
Sampol Presa	Standet: Liklik o wankain olsem 0.6 MPa; Kastom: Liklik o wankain olsem 1.0 MPa o antap
Sampol Flow Reit	100-1000 mL/min (recommended: 500 mL/min)
Ol samting bilong haus	ABS
Dijitel Autput	RS485 Modbus protocol (4-core waterproof connector)
Analog autput	Standet 4-20mA (6-kor warapruf konekta)
Sais (6mm paip)	192mm × 125mm × 78mm (W × H × D, wantaim ol samting bilong en)
Sais (10mm paip)	200mm × 131mm × 78mm (W × H × D, wantaim ol samting bilong en)